• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

APX Trunking Issue

Status
Not open for further replies.

ResqChief201

Member
Premium Subscriber
Joined
Mar 25, 2012
Messages
81
So having another issue with one of my APX6000s

It is on a Type-II system and receives, however there are times when it will not receive dispatch or the user. It happens pretty often and my scan list is only scanning 5 Talkgroups. I can hear both sides on other radios but just this one is giving me these issues. Control channels are right and the ID is correct. All the trunking info is good.

Could it possibly need to be tuned?
 

ResqChief201

Member
Premium Subscriber
Joined
Mar 25, 2012
Messages
81
Yes. Transmits fine. Just times when you will miss portions of a message and I know it's not my scan list because it happens even when I'm not scanning
 

buddrousa

Member
Premium Subscriber
Joined
Jan 5, 2003
Messages
6,107
Location
NW Tenn
It is just a thought because it has not been listed and the newest firmware in radios is always the best bet unless the radio is a lab radio.
 
Status
Not open for further replies.
Top