radio259
Member
What parts are needed to convert dash mount APX4500 BN series to remote mount?
Thanks in advance!
Thanks in advance!
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
APX4500 BN model remote kit
- Thread starter radio259
- Start date
Motorola should be giving you the list, but being a "BN" mobile, the remote head should be E5 head (if that is the head you want) part "H1936A". (/\/\otorola sent me H1930A and H1932A which are for "AN" variant mobiles). H1936A is for "B"N variant mobiles......but still dealing with RMA process.
Then appropriate CHIB GA01755AA, remote mount cable G628AC, and dash mount to remote mount retrofit kit (H1931A was sent and went with H1930A/H1932A......have not received my H1936A kits yet, so this might be different between "AN" and "BN" radios).
Then appropriate CHIB GA01755AA, remote mount cable G628AC, and dash mount to remote mount retrofit kit (H1931A was sent and went with H1930A/H1932A......have not received my H1936A kits yet, so this might be different between "AN" and "BN" radios).
radio259
Member
Thanks greatly!
With certainty, the kit to go from an O2 dash mount BN to an O2 remote mount is H1938A. That is the only configuration I can confirm as the only dash to remote conversions I have had to do are O2 4500 BN. the type of head matters when ordering the kit.
Similar threads
