Apx6000 wont decode QC2 Call

[AES-256-Encryption]

I'm probably retarded, and its a simple click, but i for the life of me can NOT get QC2 to be decoded when the NOAA weather tones go out.
FW: 21.23.00
CPG VER: R31.00.01
FLASH: 102060-A04100-0-000000-000000
D1 B1 Q806: ASTRO IMBE Digital Operation
D3 B2 QA00570: Primary Band: VHF
D5 B2 QA00583: Enable Bluetooth Operation
D5 B3 QA01749: Legacy SW System Key Enable
D7 B2 QA01833: Extreme 1-Sided Noise Reduction
D7 B4 Q507: 12.5 kHz FCC Mandate
D9 B3 QA02751: APX Li
D10 B1 Q53: FCC FPP And Radio Cloning
THIS DOES WORK FOR MY APX7000XE. Any help would be appreciated.

 

[K2NEC]

You need QA09000-Tone Signalling in the flashcode

 

[AES-256-Encryption]

You need QA09000-Tone Signalling in the flashcode

thats for digital, conventional system, my other radio doesn't have that either yet it decodes
APX7000XE
9012R8-21H483-8

D1 B1 Q806: ASTRO IMBE Digital Operation
D1 B4 G996: Over the Air Provisioning
D3 B1 QA00569: Primary Band: 700/800
D4 B2 QA00574: Secondary Band: VHF
D5 B1 QA00579: Enable Dual Band Operation
D5 B4 QA01648: Advanced System Key Enhanced Operation
D5 B5 QA01768: Enhanced Zone Bank Operation for APX
D6 B4 H38: SmartZone Systems Operation
D7 B2 QA01833: Extreme 1-Sided Noise Reduction
D8 B1 QA00782: Enable GPS/GNSS Operation
D9 B1 Q947: APCO Packet Data Interface
D9 B5 QA03399: Enhanced Data Operation
D10 B3 Q173: SmartZone Omnilink MultiZone Operation
D11 B4 Q361: ASTRO 25 9600 Baud Trunking
D12 B1 Q445: Fireground Accountability Software
D12 B2 QA00577: Front Display and Full Keypad (M3)

 

[n3obl]

Well to decode NOAA is not a-b format. You need to select a long tone option in the drop down and just put it in either B or C i believe.

 

[AES-256-Encryption]

Well to decode NOAA is not a-b format. You need to select a long tone option in the drop down and just put it in either B or C i believe.

what about a local guy who does weather and he has 504.0 for his tone out?

 

[K2NEC]

I see...now that I think about it, I don't think I was ever able to get my XTS to decode NWS either. Has anyone had luck with it?

 

[AES-256-Encryption]

I see...now that I think about it, I don't think I was ever able to get my XTS to decode NWS either. Has anyone had luck with it?

i even tried my local VFD tone that is in the 600 range, that didn't work either. MY XE will decode my VFD and the NOAA. very strange that the non XE cant, even tried a XTS same **** nothing.

 

[wgbecks]

I'm probably retarded, and its a simple click, but i for the life of me can NOT get QC2 to be decoded when the NOAA weather tones go out.

Here is how I have it setup in my APX8000.

 

[AES-256-Encryption]

Here is how I have it setup in my APX8000.

View attachment 153172

tried that on multiple radios. my apx7000xe again trips. i tried my local VFD 12 times different ways. nothing

 

[Nilsog]

I'm having the same issue with my APX7000, but only on my primary dispatch frequency. Tones sent from the dispatch console won't activate the radio, but if I switch to our local frequency and set the tones from our base radio it will activate every time.

 

[AES-256-Encryption]

I'm having the same issue with my APX7000, but only on my primary dispatch frequency. Tones sent from the dispatch console won't activate the radio, but if I switch to our local frequency and set the tones from our base radio it will activate every time.

i disabled BT and it decodes fine

 

[Asunakiyori]

Real dumb question, Do you have all your channels in the System you created for QC2?my APX7000 (FC: 9A217A-3116D7-9) does not have tone signaling QA09000 but decodes it just fine. Haven't tried any other QC systems yet but I have had this Alert and open squelch no issue

 

[AES-256-Encryption]

Real dumb question, Do you have all your channels in the System you created for QC2?my APX7000 (FC: 9A217A-3116D7-9) does not have tone signaling QA09000 but decodes it just fine. Haven't tried any other QC systems yet but I have had this Alert and open squelch no issue
View attachment 161654

AQ09000 IS ONLY NEEDED IF IT HAS DIGITAL TONES. Analog RX QC2 is free with the radio.

 

[GTR8000]

i disabled BT and it decodes fine

This is 100% not the issue. I have a number of APX with Bluetooth enabled/functioning that have no issues at all decoding QCII (analog or digital).

 

[AES-256-Encryption]

This is 100% not the issue. I have a number of APX with Bluetooth enabled/functioning that have no issues at all decoding QCII (analog or digital).

BN or AN? i use an AN model and disabling Bluetooth fixed it

 

[Asunakiyori]

Mines an AN and i have BT active all the time it decodes 1050 hz fine

 

[AES-256-Encryption]

Mines an AN and i have BT active all the time it decodes 1050 hz fine

strange

 

[GTR8000]

4000, 6000AN, 6000BN, 6500, 7000, 7500, 8000...no issue with any of them, BT enabled or otherwise.

 

[Asunakiyori]

So I'm reviewing my settings in my APX 7 and 4, My MDC system receives and decodes.and then Page Received pops up on the receiving unit

 

[Bethanylt241]

I'm having the same issue with my APX7000, but only on my primary dispatch frequency. Tones sent from the dispatch console won't activate the radio, but if I switch to our local frequency and set the tones from our base radio it will activate every time.

Did you ever find a solution for this issue? I am encountering the same thing