ARC-XT PRO NAC display

Status
Not open for further replies.

375

Member
Premium Subscriber
Joined
Dec 4, 2009
Messages
55
Location
Newark, Delaware
Using Butel's ARC-XT PRO software I've logged a few NACs that display only single or double digits such as 1 or 94. Would it be safe to assume the 0's are not displaying, thus making them 001 and 094?
Thanks
 

375

Member
Premium Subscriber
Joined
Dec 4, 2009
Messages
55
Location
Newark, Delaware
Thanks Mike,
I figured as much. I've run across a few unknown NACs. I take my 396XT to work everyday but doing NAC searches inside the building where I am is pretty much useless unless you are transmitting from the parking lot. I need to trade my 996T up to 996XT but for now I think I'll figure out how to record (ARC996PRO) from it as I can at least do some matching up of received signals to try to figure who these new NACs are!
dave
 

ChrisP

Member
Premium Subscriber
Joined
May 20, 2002
Messages
1,129
Location
Portland, OR
And just FYI, it's not the ARC-PRO software dropping the leading zeros on the NAC's, but the 396XT. It drops the leading zeros on the radio display of the NAC.

- Chris
 

375

Member
Premium Subscriber
Joined
Dec 4, 2009
Messages
55
Location
Newark, Delaware
Thanks for the confirm Chris. I guess if the 'Creators' can overcome such NACs as 9C5 (170-171 area up here) this too shall pass in some future update.
 
Status
Not open for further replies.
Top