ARC300 and Pro-163

Status
Not open for further replies.

Pressman39

Newbie
Joined
Feb 1, 2010
Messages
1
Location
London Kentucky
I have a Pro-163 Radio Shack scanner and I just purchased the ARC300 software to download the frequencies into the scanner. I have the software downloaded and it seems to be working. But I can NOT get the frequencies to transfer from the software to the scanner. any suggestions?
 

zonesecur

Newbie
Joined
Feb 6, 2010
Messages
1
Location
Quebec
ARC300 vs PRO163

Well, keep it simple. IT DOESN'T WORK
Good cable, rigth USB port, ver 1.07 (pro-163 new), ver 1.21 build 6 Full (butel) and windows with a transfert progress line. Everything looks good. But:
1. The name Radio-Shack replaced by PSR-300
2. No Frequency, no funny

What's wrong ???....
 

JamesPrine

Member
Joined
Jan 25, 2010
Messages
168
Location
Ponchatoula, Louisiana USA
There's a little box that you can choose the exact scanner you need to program, if I remember correctly, ARC300 supports several scanners.

And be sure you take remove the cable extender that ships with the Radio Shack USB programming cable so it will communicate properly!

Good luck!
 

danyb50

Member
Joined
Feb 17, 2010
Messages
2
The right comm port has to be chosen from your Device Manager,Hardware ,Ports.Sometimes it is comm 4
 
Status
Not open for further replies.
Top