• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

asking for a radio check

Status
Not open for further replies.

devolic

Member
Joined
May 16, 2008
Messages
38
I just applied for a GMRS license. I haven't used it in quite a while. What frequency is mostly used for doing a radio check?

Thank-You,
Doug
 

SteveC0625

Order of the Golden Dino since 1972
Premium Subscriber
Joined
Oct 24, 2009
Messages
2,795
Location
Northville, NY (Fulton County)
I just applied for a GMRS license. I haven't used it in quite a while. What frequency is mostly used for doing a radio check?



Thank-You,

Doug



With you and a friend or with someone out on the air? Any quiet channel for you and a friend.

If you're trying to reach out to others, it's probably best to listen to find a channel with some activity. Can't do a check if there's no one to reply to you.
 

mmckenna

I ♥ Ø
Joined
Jul 27, 2005
Messages
23,857
Location
Roaming the Intermountain West
Also, be aware that many/most users are going to be running PL or DPL tones on their radios. Unless you figure out what they are running, they won't hear you. If you do, they may not appreciate it.

Best solution is to get a friend with a radio set up correctly to assist you.
 

RFI-EMI-GUY

Member
Joined
Dec 22, 2013
Messages
6,868
I just applied for a GMRS license. I haven't used it in quite a while. What frequency is mostly used for doing a radio check?

Thank-You,
Doug
Once you get your call sign, make an account on myGMRS.com and search for repeaters in your area. Email the owner and ask to do a radio check with them.

Sent from my SM-T350 using Tapatalk
 

Will001

Member
Premium Subscriber
Joined
Dec 1, 2016
Messages
514
Location
Lexington County, SC
I usualy use GMRS Ch.1 462.5625 MHz for radio checks on simplex. Ch 20 is also a good channel to use if you have a liscence
 

MeddleMan

Member
Joined
Feb 22, 2009
Messages
247
Location
Mokane, MO
Ch. 20 and PL

Usually considered an Emergency channel. Not that it makes much difference. Much like CB Ch.9. Not as strict as it could be. Ch. 1 is a great place to start. I usually have another receiver (scanner) or transceiver (bubble pack radio, or some other device) and check it myself.
 

n1das

Member
Joined
Feb 17, 2003
Messages
1,601
Location
Nashua, NH
I usualy use GMRS Ch.1 462.5625 MHz for radio checks on simplex. Ch 20 is also a good channel to use if you have a liscence
Keep in mind that there is no official channel numbering in GMRS. Ch 20 = ? Most likely 462.675 MHz in most 22 channel bubble packs.

Also 462.675 used to be reserved for emergency and traveler assistance, sort of like CB channel 9. This went away when GMRS went to all-channel licensing in 1999. Many local REACT groups operated on 675 and some may still be active. PL 141.3 was often used as the travel tone.

Good luck.



Sent from my Nexus 6 using Tapatalk
 
Status
Not open for further replies.
Top