Augusta Fire Dept

ScanMaine

Active Member
Premium Subscriber
Joined
Apr 24, 2013
Messages
1,783
Location
Lewiston Maine
I can here APD on there prime and the NAC is 770 but I have been monitoring AFD all day and not one hit, Last I new they was NAC 770 too. Am I missing something?


Thanks
 

ScanMaine

Active Member
Premium Subscriber
Joined
Apr 24, 2013
Messages
1,783
Location
Lewiston Maine
86 hits it 2 days for APD and 3 for AFD, Im really missing something here. There towers are located at the same repeater sites.
 

ScanMaine

Active Member
Premium Subscriber
Joined
Apr 24, 2013
Messages
1,783
Location
Lewiston Maine
and to make matters even worse only 9 hits of Kennebec SO on the Mscomm system in 2 days?? Something isn't right.
 

ScanMaine

Active Member
Premium Subscriber
Joined
Apr 24, 2013
Messages
1,783
Location
Lewiston Maine
So Im sitting here listening to my SDS200 and Im listening to a P25 system Augusta Fire Department and Im logging direct on there dispatch channel and all im getting is multiple hits on the log there is NO AUDIO. No Signal bar nothing its dead! The hit counts keep going up but no noise! Also there PD has antennas on the same towers as Fire and the Nac's are the same 770 but there loud and clear and triple digit hits and audio

ANY IDEASE???????
 

ScanMaine

Active Member
Premium Subscriber
Joined
Apr 24, 2013
Messages
1,783
Location
Lewiston Maine
So Im sitting here listening to my SDS200 and Im listening to a P25 system Augusta Fire Department and Im logging direct on there dispatch channel and all im getting is multiple hits on the log there is NO AUDIO. No Signal bar nothing its dead! The hit counts keep going up but no noise! Also there PD has antennas on the same towers as Fire and the Nac's are the same 770 but there loud and clear and triple digit hits and audio

ANY IDEASE???????
57 hits over night and not 1 audio recording no signal bars no nothing!


Please take a guess what could be wrong!
 

ScanMaine

Active Member
Premium Subscriber
Joined
Apr 24, 2013
Messages
1,783
Location
Lewiston Maine
ok so i just did a custom search on my 996P2 and my sds200 with the freq 152.9225 and im getting audio and voice as well as hits on that frequency, but i also have it in my scanners and when it scans i get nothing but hits and no audio??
 
Top