Austin and Pro96Com

[blantonl]

Ok Austinites....

Anyone tackled getting Pro96Com (trunker Like interface) up and running on the Austin system...

I could use some confirmed freq lists for sites #1 and #2.

Anyone?

 

[SCPD]

Hmmm ... I can check sites 1 and 4.
-rick

 

[SCPD]

pro96com: snapshot of site 01

FileVersion:1
-TowerInfo
#This section is here for information only. This data is not
#Read back into the program at all.
System ID : 13e
System Name :
WACN : bee09
Tower Number (Decimal): 101
Tower Number (Hex) : T0101
Tower Description : (null)
Control Capabilities : Voice,Registration

-Tables
#Format: Table ID,Base Freq,Spacing,Input Offset,Assumed/Confirmed
0,851.00625,0.00625,-45.00000,Confirmed
1,762.00625,0.00625,30.30000,Confirmed
2,151.47500,0.00500,-5.81250,Confirmed
3,150.99500,0.00500,-13.00000,Confirmed
4,151.22000,0.00500,-20.23750,Confirmed

-Frequencies
#Format: Channel,Usage,Frequency
0-965,i,866.03750
0-979,a,866.16250
0-98d,c,866.28750
0-9a1,a,866.41250
0-9b9,a,866.56250
0-9d1,v,866.71250
0-9e1,v,866.81250
0-9f3,v,866.92500
0-a0d,v,867.08750
0-a11,v,867.11250
0-a31,v,867.31250
0-a35,v,867.33750
0-a5b,v,867.57500
0-a5f,v,867.60000
0-a83,v,867.82500
0-a87,v,867.85000
0-aaf,v,868.10000
0-ab3,v,868.12500
0-ad9,v,868.36250
0-ae3,v,868.42500
0-b03,v,868.62500
0-b0d,v,868.68750
0-b2b,i,868.87500
0-b37,v,868.95000

-Neighbors
#Format: TowerID,TowerIDHex,Channel,Frequency
105,T0105,0-ac3,868.22500
106,T0106,0-a93,867.92500
107,T0107,0-9f7,866.95000
108,T0108,0-a07,867.05000
104,T0104,0-a73,867.72500
103,T0103,0-a7f,867.80000
102,T0102,0-975,866.13750

 

[mikey60]

Re: pro96com: snapshot of site 01

-Tables
#Format: Table ID,Base Freq,Spacing,Input Offset,Assumed/Confirmed
0,851.00625,0.00625,-45.00000,Confirmed
1,762.00625,0.00625,30.30000,Confirmed
2,151.47500,0.00500,-5.81250,Confirmed
3,150.99500,0.00500,-13.00000,Confirmed
4,151.22000,0.00500,-20.23750,Confirmed

I guess the process is still off on the TX offset, or they are just off in the system configuration...

Mike

 

[blantonl]

No, I believe it is working right.

The Austin system did a few tests of a 150 MHz site during a radio convention in the Austin area a few months ago.

Everyone should keep an eye out on any 9600 baud control channels that pop up in the VHF range in the Austin area... especially on state licenses.

 

[mikey60]

I was just looking at that -20.23750Mhz tx offset. It seemed a little high.

BTW for those that would used a Pro-96 to monitor...

0,851.00625,0.00625,-45.00000,Confirmed
2,151.47500,0.00500,-5.81250,Confirmed
3,150.99500,0.00500,-13.00000,Confirmed
4,151.22000,0.00500,-20.23750,Confirmed

Translates to this custom multi-table:

CH lo CH hi Base Freq Offset Step
0 4095 851.00625 0 6.25
8192 12287 151.47500 8192 5.0
12288 16383 150.99500 12288 5.0
16384 20479 151.22000 16384 5.0

Mike