Im looking for the Baldwinsville Fire Tone outs Or Northwest fire Tone outs, The tone outs in Radio Reference are wrong.Would also like the tone outs for Belgium Cold Springs Fire , These fire Depts are all in Onondaga Ounty
Baldwinsville NY Fire Tone outs
- Thread starter Scan1604
- Start date
| Baldwinsville FD | 652.5 | 922.5 |
| Baldwinsville FD | 652.5 | 1036.0 |
| Baldwinsville FD | 652.5 | 1082.0 |
| Baldwinsville FD | 652.5 | 1130.0 |
| Baldwinsville FD | 652.5 | 1180.0 |
| Baldwinsville FD Chief | 652.5 | 495.8 |
So your saying all those above are wrong?
These are listed on the same page. Did you not see them or are they wrong too?
| Belgium-Cold Springs FD | 967.5 | 922.5 |
| Belgium-Cold Springs FD | 967.5 | 435.3 |
| Belgium-Cold Springs FD | 967.5 | 454.6 |
| Belgium-Cold Springs FD | 967.5 | 474.8 |
| Belgium-Cold Springs FD | 967.5 | 495.8 |
| Belgium-Cold Springs FD Chief | 967.5 | 416.9 |
yes none of the Tone outs work
Thats alot of tone outs that don't work. What scanner do you have and how are you entering them in?
Can anyone up in Onondaga County comment or confirm?
Can anyone up in Onondaga County comment or confirm?
I assume your using the 453.850 paging channel and not replying on the FDMA TLMR system ?
They were provided by one or more hobbyist contributors so as with frequency data there's no guarantee of 100% accuracy. If you're looking to get a pager programmed it's best to contact your chief officer for guidance
Not in a dpt anymore I was in red cross and liverpool and lyncourt, due to my health can no longer respond but i enjoy listening to my local depts
Since you have the 200, set it up to search for the tones.
Tone-Out Setup |
| Press Menu. Scroll to Tone-Out for... and press E/yes. Scroll to Tone-Out Setup and press E/yes. Scroll to Tone-Out 0-31 and press E/yes. |
| Set Frequency 453.850 |
| Edit Frequency |
| Enter the frequency and press E/yes. |
| Set Modulation |
| Auto, NFM, FM |
| Set Attenuator |
| On or Off |
| Set Tone To search for tones, leave the tones for A and B at 0. |
| Edit Tone A and press E/yes. Enter the tone and press E/yes to save. Edit Tone B and press E/yes. Enter the tone and press E/yes to save. Press Menu to return. |
| For two-tone pages, enter the tones (in Hz) for tone A and tone B. For one-tone pages using short tones between 1.25 and 3.75 seconds, enter tone for tone A, and 0 for tone B. For long-tone pages, such as group pages of more than 3.75 seconds, enter 0 for tone A, and the tone for B. |
| Set Delay Time The scanner resumes Standby as soon as the carrier drops after a page. A negative delay will force a resume after that number of seconds. The default setting is 2 seconds. |
| 0 - the scanner resumes standby as soon as the carrier drops after a page. 1, 2, 3, 4, 5, 10, 30 - (seconds) the scanner resumes standby mode after the carrier drops and the selected time expires. Infinite - you must press Channel after a page to resume standby mode. |
| Set Alert |
| Set Alert Tone |
| Alert 1-9 or Off. |
| Set Level |
| Level 1-15 or Auto (the master volume level). |
| Set Alert Light |
| Set Color |
| Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White. |
| Set Pattern |
| On, Slow Blink, or Fast Blink. |
I would verify your programming.
Similar threads
