• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Baofeng UV5R

Status
Not open for further replies.
M

MikeDickerson

Newbie
Premium Subscriber
Joined
Nov 16, 2012
Messages
4
Location
Sorrento, Florida
Just bought a new UV5R. Figured out the programming both manual or using the downloaded software. I was even able to figure out I needed the correct version of the software.

Now I'll admit an as much of a noob as there ever was when it comes to the programming of a radio. But the concepts are rocket science either..

In any case I have added a few channels of local repeaters, entered the TX & RX frequencies, the RX & TX CTCS values. Even named the channels with meaningful stuff...

But... I get no audio. I find it hard to believe there's absolutely no repeater traffic. Once in a while I hear some CW, but no voice. I can get voice audio if I tune(frequency mode) to a local EMS or Fire Dept dispatch, so I know the receive & the audio are working.

I've lowered the squelch to a setting of one. (zero gives me the background noise..), and tried setting all the CTCS values to OFF with the same results...

I'm kinda stumped.. Is there something beside the frequencies and CTCS values I need to update to make it work?

Thanks..
 
Status
Not open for further replies.

Similar threads

N
Midland BR180 & Kenwood ProTalkXLS/PKT-23
Replies
0
Views
190
NorthernRedwood
N
G
no Duplex operation repeater HYTERA RD625 accessory connector
Replies
0
Views
126
Guillaumet
G
W
Anyone have experience repairing MTS2000s?
Replies
9
Views
556
brndnstffrd
B
D
Baofeng DM1701 No audio in DMR, No support from BOAFENG
Replies
1
Views
181
kb1fua
kb1fua
W4KRR
XG-100P conventional P25
Replies
4
Views
254
BMDaug
B
Top