bc296d and selecting a specific talk id

Status
Not open for further replies.

jdc50

Member
Joined
Feb 21, 2004
Messages
173
Location
lansing michigan
My local fire department is on an EDACS system. I have programed their talk groups in to my scanner. They dispatch on Firemain but go to Tac 1, 2 or 3 depending on the need. I would like to be able to hold on the individual tac so that I do not hear all the dispatch traffic. Any suggestions on how to do this?

Thanks

Jim
 

ButchGone

Member
Joined
Jan 9, 2004
Messages
832
Re;

Once you are on the TAC channel you want to stay on, just press the hold key.
You can also press the hold key at anytime to stop the scan, then use the orange scroll bar to scroll backwards or forwards to any talk group id you want.
BG..
 

jdc50

Member
Joined
Feb 21, 2004
Messages
173
Location
lansing michigan
Thanks for your help. I had actually tried what you said before and it didn't work. I found that I still had priority on. Now all is well.

Thanks
 
Status
Not open for further replies.
Top