I live in Southeast Texas (Jefferson County) Re-Programmed Scanner using the software ARC396 from Butel Software with the assistance of Radio Reference. Went through steps from Uniden & from Butel, no scanner transmission what so ever. Does anyone Know the steps to go through or can anyone HELP. I'am dead in the water. I know of the Rebanding of this area.
Thanks
Did you change system type from "Motorola Type 2" to "Motorola Type 2 800 Mhz Custom," by hitting the "Reband" 'button' while editing the system? You'll also need to enter the custom band plan for the rebanded systems (I just tried the import, it does not seem to enter that automatically for me).
Also, I presume that you've also updated your 396 (the 'T' version, not XT, since you are using ARC396 instead of ARC-XT) to the rebanding supported firmware? You have to be at at least version 3.00.00 firmware. The most recent firmware is 3.02.02.
You can get the 3.02.02 firmware
here. The 'custom bandplan' that needs to be entered is also on that page, at the very bottom. It's also on
this page.
I'm not in your area, but if you'll post your file, then I'll take a look at it & see if there is something that catches my attention. Somebody much closer to your area would also be able to do the same. Due to file extention restrictions, you'll need to either 'zip' the system file before you can upload it, or save it with an approved file name on the end. For example, it may be, now, "Jefferson.mem". Use "File-Save as->" and use the name "Jefferson.mem.txt", then attach that file to your post.