I am finally getting the hang of this scanner. However I noticed a slight delay before audio is transmitted from the radio when monitoring Broward County, FL's TRS which is a Motorola Type 2 trunked system.
I verified this further by having my pro-106 monitor the same talkgroup as the bcd396xt. The pro-106 would catch someone say "10-4" while the bcd396xt will only catch the "4". Is this normal for this radio?
I turned off the
-AGC,
-priority,
-close call,
-battery save,
-and made sure I'm in analog only mode
..but still no luck. Any other ideas?
Thanks,
Singh AJ4VS
I verified this further by having my pro-106 monitor the same talkgroup as the bcd396xt. The pro-106 would catch someone say "10-4" while the bcd396xt will only catch the "4". Is this normal for this radio?
I turned off the
-AGC,
-priority,
-close call,
-battery save,
-and made sure I'm in analog only mode
..but still no luck. Any other ideas?
Thanks,
Singh AJ4VS