RFI-EMI-GUY
Member
- Joined
- Dec 22, 2013
- Messages
- 6,868
I need to connect my BCD536HP to an external (hardware) recording device and don't want to use VOX due to the delay. So I need a COR, or Carrier Operated Relay/Carrier Indicate Signal. I was hoping the speaker leads would exhibit a DC transient when the audio PA is turned on, but that isn't the case.
Is there a COR signal present on the DB-9 connector on the rear? Or do I have to dig inside to make a connection?
I have done this many times before, but without a schematic it will be a hassle.
Thoughts?
Is there a COR signal present on the DB-9 connector on the rear? Or do I have to dig inside to make a connection?
I have done this many times before, but without a schematic it will be a hassle.
Thoughts?