- Joined
- Aug 1, 2011
- Messages
- 893
yes to all
the wired thing is.the range set to 0 it shows Lincoln site full signal with dat and lnk. with no audio on the 536HP
On the the 996XT everything is programmed the same with audio to the Lincoln site for Troop HQ TG.
on the 536HP i change the range to 20 and pick up other sites for the same system witch come in with Troop HQ
this is the system i am working with
Nebraska State Radio System Trunking System, Statewide, Nebraska - Scanner Frequencies
here is the save for sentinel for the 536HP
https://drive.google.com/folderview?id=0B96kt8k8Rs-Ta2ZqMXVodGFhdE0&usp=sharing
here is the saved data for my 996XT XTpro
https://drive.google.com/file/d/0B96kt8k8Rs-TWEZWSm9pRHVUWkU/edit?usp=sharing
okay it seams it doesn't want to read the CC
I held a Channel it flashes dat and lnk slow when It was working right it was fast. Mite something wrong with my scanner or the software
If you are getting a signal but no audio and you have set your range to 0.0 maybe you need to turn ON "Location Based" scanning. At least I think that is what it is called. Most people I think only use location based scanner when mobile with a GPS puck. Since I have not done that yet I am not to familiar with all the things needed to get it to work although I have a GPS puck and used it stationary in my car last year with my 996T just to see if it would work and it did.
Also, make for sure in Sentinel that your "System Type" is still correct for this problem system. I got that wrong once and I got what you are getting, full 5 bars but no audio.