BDC396 Trouble

Status
Not open for further replies.

VE3EJP

Member
Joined
Mar 30, 2010
Messages
10
Hello Im quit new to digital and need a hand . I have this unit with my desired frequencys programmed. My issue is everything the unit picks up only plays for about 2-3 seconds at a time. then the signal indicator flashes and the signal comes back. Im wondering if there is some modualation setting or general unit setting im not familar with that I can change. at first i thought it was from the frequency but when I try to listen to local radio its doing the same thing. any input would help. I havent connected this unit to a computer as i dont have a serial port and unit is brand new. Thanks in advance
 

Viper43

Member
Joined
Jul 23, 2005
Messages
3,309
Sounds like you have priority or close call turned on and it is checking one or both then returning to the channel
 

rmosier

Member
Joined
Aug 13, 2002
Messages
249
Location
Mt. Olive,NJ
Check to see that Priority is off, Close call is set to DND "Do Not Disturb" (if you have the latest firmware), and be sure that S.A.M.E Weather Alert is turned off as well.
 
Status
Not open for further replies.
Top