Best method to monitor XPT

[sonm10]

Hello all,
Was wondering the best method to monitor this system Treasure Island Resort & Casino Trunking System, Red Wing, Minnesota

I know from reading on the forums here that XPT is very difficult to track. What are you all using? I would prefer SDS200 because of the recording capability, but not apposed to DSD+, also.

 

[ka3jjz]

XPT tracking is not a strong point for the SDS scanners as I understand it. I would go with DSDPlus and an elcheapo stick SDR

Mike

 

[R0am3r]

Hello all,
Was wondering the best method to monitor this system Treasure Island Resort & Casino Trunking System, Red Wing, Minnesota

I know from reading on the forums here that XPT is very difficult to track. What are you all using? I would prefer SDS200 because of the recording capability, but not apposed to DSD+, also.

I monitor the Turning Stone Casino XPT system in Upstate New York using my SDS200. This system uses four frequencies with numerous talk groups. This post explains how I configured my scanner to successfully monitor all four frequencies.

BCD325P2: - DMR XPT scanning on the BCD325P2

Does anyone on here have some experience with successfully scanning a DMR XPT system? I have near me a casino that is using XPT (Hytera) and I have the system programmed like so: DMR/MotoTRBO > MotoTRBO Trunk > Site > Set Frequencies > enter in all 5 frequencies identified that have the...

forums.radioreference.com

 

[sonm10]

@R0am3r is that set as standard trunking or 1 frequency? Thanks

 

[R0am3r]

@sonm10 - Set it to MotoTRBO Trunk. Your SDS200 should recognize the system as XPT and display as such.