• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Both digital and analog operation?

Status
Not open for further replies.

human8472

Member
Joined
Mar 3, 2014
Messages
201
Which Motorola radios can communicate in both analog and digital modes? XTS-3000, XTS-5000, Astro Saber? Thank you.
 

human8472

Member
Joined
Mar 3, 2014
Messages
201
Thank you. If they are digital capable does that mean they are narrowband compliant?
 

PACNWDude

Member
Joined
Oct 15, 2012
Messages
1,345
As long as the Motorola radios are in the same series, they are usually compatible. For instance: a XTS5000 can talk to a XTL1500 in digital and analog modes. This of course assumes programming and any encryption is compatible.
Now a XTS5000 is not able to talk to a MotoTrbo XPR4550 in digital mode. They will work in analog, but Motorola digital is not the same across the board.
This is due to XTS radios being FDMA, XPR radios being TDMA, and then there are spread spectrum frequency hopping radios like the DTR series.
There are a lot of details that can cause a radio to not be able to talk to each other in digital mode. Sorry to open the can of worms.
 

kayn1n32008

ØÆSØ
Joined
Sep 20, 2008
Messages
6,628
Location
Sector 001
Wirelessly posted (Mozilla/5.0 (BlackBerry; U; BlackBerry 9900; en-US) AppleWebKit/534.11+ (KHTML, like Gecko) Version/7.1.0.1047 Mobile Safari/534.11+)

The XPR/SL series of radios operate in DMR mode, the XTS/XTL series operate in P25 phase 1 and the APX series operate in P25 phase 1&2. The only level that ALL(across different series) these radios communicate is in conventional analogue. Both the XPR/SL series operate in TDMA digital. The APX series can operate in both FDMA(phase 1) and TDMA(phase 2). The XTS/XTL only operate in FDMA(phase 1)

Motorola offers 3 types of digital radios that are not compatable with each other.
 
Last edited:

chrismol1

P25 TruCking!
Joined
Mar 15, 2008
Messages
1,172
Most everything produced since the 1990s has been narrowband selectable including xts3000,xts5000 & astro saber
 
Status
Not open for further replies.
Top