Broadcasting Live feed via Allstar system

Status
Not open for further replies.

lorentedford

Member
Joined
Sep 17, 2006
Messages
15
Location
Olney, IL
Hello its Loren here and I run a couple of repeaters out here in Southern IL. These repeaters are computer controlled via Allstar software this software is basicly a linux based software. We have been given directions from the appt rpt user forum but still having issues was wondering if some one here is familure with what i am doing and and any thoughts or suggestions.. Bascily the system works using Asterisk so both repeater are running off of Asterisks internally we were using kinda like ICE cast to stream it back to Broadcastify.. Think my feed no longer exist due to repeated down time because of working on this particular issue however we would eventially like to put both feeds back online.. Anythoughts as to why Ezstream would lock up the whole system and cause us to reboot the repeater? Anythoughts as to why Asterisk and Ezstream would lock up? Thanks for the help in advance ~ Loren
 

lorentedford

Member
Joined
Sep 17, 2006
Messages
15
Location
Olney, IL
---- Solved ---

1.) Extract the attached file EZS.tgz

2.) Run 'sh EZS'

3.) Agree to everything - yes

4.) Modify the /etc/ezstream.xml file - replacing the ######'s with the
correct
mount point/password/name of your stream. (These details are provided by
radioreference.com when you sign up to do a stream FREE (under the
"Technicals" tab in the stream management section.)

5.) add the following to your /etc/asterisk/rpt.conf in the first section
ex: above the status reporting section.
"outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
--bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream.xml"

*This should be all on one line ^^^*
You may change the ezstream.xml name if you wish but also do so in the /etc
dir, ex: if you had multiple streams/nodes to stream from.
This setup is per node.

btw sometimes I have had to set a cron to kill the ezstream each week or so
- has not been an issue lately if you do notice it failing, the command is
'kill -9 $(pgrep ezstream)&' This will not break/stop ezstream but should
restart it...
 

k5glh

Member
Feed Provider
Joined
Jun 5, 2005
Messages
8
Location
DEL CITY
I followed your directions and it appears to have put my stream on the air. There is no audio coming through when I talk locally or over the node. Can you think of anything that I may have set incorrectly?

Thank you,
Paul, K5GLH

My stream is located... https://www.broadcastify.com/listen/feed/26843
 
Status
Not open for further replies.
Top