BCD536HP: broken BNC connector

Status
Not open for further replies.

tomasgn

Member
Premium Subscriber
Joined
Jan 22, 2011
Messages
1
it seems the BNC connector on my BDC536HP got broken, either in the connector itself, either in the pig tail, so i have to replace it.
does anybody knows which connector type is used to connect the pig tail to the radio board?
 

nr2d

Member
Joined
Dec 28, 2003
Messages
453
Location
Laurel Springs, NJ
It is a micro MCX connector. If I remember I'll lookup the company I had made my replacement pigtails for my 3 536s. I had them make them 4" in length which I feel puts less strain on the MCX connector. The only problem I ran into was the chassis mount BNC connector diameter was about 3/16" larger in diameter. So I used a 1/2" Greenlee sheet metal punch to enlarge the hole for the BNC connector.
 
Status
Not open for further replies.
Top