Burlington Co ( South )

[RayEMTFF]

Hi Guys Looking for some help here. Trying to re program a 2096 Scanner. PC link cable doesn't seem to work so doing this by hand. I have all my TG program. But the Problem I am having is with what Bank Freq to use. Burlington is a Big County as we know and it has 3 Different Base Freq. Which one do I use. I am right now using 500.325 Offset 380 12.5 step.

And If I do have it Right does it matter what the 3600 CC mode and 9600 CC Mode is set at?

There are times when it stops on the Ch but NO sound.

 

[W2SJW]

You need all 3 sets of base & offset tables, and the ONLY way to do that is via a PC program. The scanner is physically incapable of taking more than 1 table through the keypad.

 

[RayEMTFF]

W2SJW Don't tell me that LOL I have the PC software but for some reason I can not get it to download to the Scanner. I just bought ARC96 ( Big Mistake I think ) And Yesterday Download Win. That didn't work either. So I am Stuck then ugh. Thank You for the Reply

 

[W2SJW]

Just to be sure, please tell me that you are trying to program the unit through the PC/IF port, and NOT the speaker jack!

Also, the RS cable usually come with an adapter, and I can't remember if that unit needs it on or not.

 

[RayEMTFF]

W2SJW Oh Hell is that what I did wrong LOL No I am using the PC/IF port. When I plug it in I do get the Green Light. But when I hit SEND to scanner program tells me its sending it up the Scanner stays on MODE I don't get it