cdesigns
Member
I wanted to make this post regarding a comunication error fix when programming DTR 600 / 700 Radios, I looked everywhere and didn't find how to resolve the problem. I can program my DTR 410 and DTR 650 fine with the OEM Serial cable using a cheap USB to Serial converter, but when programing DTR600 and DTR700 using the OEM motorola USB cable, 8 out 10 times it gives me an error while uploading to the radio. I fixed the problem by changing the timeout settings on the USB Serial Port settings.
Go to DEVICE MANAGER
USB Serial Port (COM#)
Right Click and choose PROPERTIES
Go to PORT SETTINGS then ADVANCED
Then change TIMEOUTS from 0 to 1000msec.
it should read and write fine after this change.
Hope this helps anyone with the same problem.
(5) DTR410
(2) DTR650
(3) DTR700
Love them all.
Go to DEVICE MANAGER
USB Serial Port (COM#)
Right Click and choose PROPERTIES
Go to PORT SETTINGS then ADVANCED
Then change TIMEOUTS from 0 to 1000msec.
it should read and write fine after this change.
Hope this helps anyone with the same problem.
(5) DTR410
(2) DTR650
(3) DTR700
Love them all.