• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Can UV5R firmware be flashed?

Status
Not open for further replies.
W

WPXS472

Member
Joined
Aug 3, 2013
Messages
226
Location
Heflin, AL
I thought this was a settled matter. UV5 firmware cannot be flashed. Right? Well, a certain fellow I know claims to have flashed his UV5R with some special firmware. When I asked him to point me to the place where he found it, his memory got a little fuzzy. So, what the truth about this? Can UV5-R firmware be flashed, or not? If so, how do you go about doing it? I apologize if this has already been beaten to death.
 
N

nd5y

Member
Joined
Dec 19, 2002
Messages
11,297
Location
Wichita Falls, TX
From the schematics available on the FCC web site it looks like the UV-5R has a Elan EM78P568-44 processor.
The data sheet for it says:

I. General Description
The EM78P568 is an 8-bit RISC type microprocessor with low power, high speed CMOS technology. There are 16Kx13 bits Electrical One Time Programmable Read Only Memory (OTP-ROM) within it. It provides security bits and some One time programmable Option bits to protect the OTP memory code from any external access...

Than means you can only write to it one time and you probably can't even read the firmware from it.
 
Status
Not open for further replies.

Similar threads

H
BCD436HP/BCD536HP: Force firmware update
Replies
2
Views
710
nessnet
nessnet
pb_lonny
Extreme Scanning
2
Replies
21
Views
3K
bharvey2
B
N
Baofeng Baofeng UV5r+
Replies
0
Views
665
n2xph
N
Sheepdog777
Traveling Ham Mobile Radio - U.S. Repeaters Common Frequencies (2M & 70Cm Bands Only)
2 3
Replies
42
Views
9K
KJ7YMR
K
MJFritchman
XPR Motorola XPR-6550 Guidance
Replies
9
Views
2K
Forts
Forts
Top