• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Can't hear EDACS with PRO 2096

Status
Not open for further replies.

RoyNolt

Member
Joined
Apr 8, 2006
Messages
27
I need some help with programing my PRO 2096 for Lebaon Coounty Pa. EDACS, I used win96, put LCN1 on channel 01 installed the talkgroups for the police. I have an outside antenna but don't hear any thing from the police in Lebanon. Does my scanner automaticly pick up anlog and digital signals? If I stop my scanner on one EDACS banks and the display shows the frequancy, ED, Lebanon Ci05, bottom line shows EDACS: none. Thanks in advance for help. Roy
 

RoyNolt

Member
Joined
Apr 8, 2006
Messages
27
I just checked, banks 1and 2 I have 453.0250 in bank 101 and 453.3125 in bank 201 and I did not hear any thing.
 

rpowley

Member
Joined
Dec 29, 2004
Messages
515
Location
Rowlett, Texas
Some of that system is ProVoice, which you won't be able to receive. You may want to check with some local folks in the PA forum. I know that some info for that system was recently updated.
 
Status
Not open for further replies.
Top