RidingDownUnder
Member
Hi group,
when I receive a CAP transmission in a mixed flavour Fav List and that CAP transmission stops but still sends data bursts every 1 to 5 seconds for about 30 seconds then the data bursts stops so I have silence, I noticed my 536PT doesn’t resume scanning no matter how long I wait. FWIW I had the audio option set to all. So what I did is I took note of the colour code (1) and added the cc to the channel via audio options and now the scanner starts scanning again after the CAP transmission ends.
I thought I would pass it along to anyone else who has the same problem.
forums.radioreference.com
when I receive a CAP transmission in a mixed flavour Fav List and that CAP transmission stops but still sends data bursts every 1 to 5 seconds for about 30 seconds then the data bursts stops so I have silence, I noticed my 536PT doesn’t resume scanning no matter how long I wait. FWIW I had the audio option set to all. So what I did is I took note of the colour code (1) and added the cc to the channel via audio options and now the scanner starts scanning again after the CAP transmission ends.
I thought I would pass it along to anyone else who has the same problem.
Understanding Capacity Plus trunking
Hello In answer to indigo88's post the bit 2 in the CSBKO=62 PDUs refers to the channel in use. So the CSBKO=62 may be being sent on channel 1 but bit 2 tell the radios which channel the voice or data activity is taking place in channel 2. I'm finding the channel number from the CACH. In...
Last edited:
