Michael_77
Member
- Joined
- Feb 20, 2020
- Messages
- 8
Hello guys, I've got the issue with Cap+ channel numbers setup.
I`m going step by step according to the setup instructions in the note.txt, but at the step f) I`ve blocked with the next situation:
I`ve found 4 sites and 5 channels at every one.
For example for Site1 I’ve got:
Cap+, 9999, 1, 991 , 450.0130, 0.0, 0
Cap+, 9999, 1, 991, 450.1500, 0.0, 0
Cap+, 9999, 1, 991, 450.2750, 0.0, 0
Cap+, 9999, 1, 991, 450.4380, 0.0, 0
Cap+, 9999, 1, 991, 450.5880, 0.0, 0
At the step f) I`m trying to recognize correct channel numbers, setup FMP24 to control/rest channel monitor (–rc option) on frequency 450.0130. Also I run DSD+ in control/rest channel decoder(–rc option). And at the event log I find the next notes:
450.013000 is first Cap+ repeater (Ch1 and Ch2)
….
450.013000 is fourth Cap+ repeater (Ch7 and Ch8)
At the 450.438 I’ve got the same situation:
450.438000 is first Cap+ repeater (Ch1 and Ch2)
450.438000 is fourth Cap+ repeater (Ch7 and Ch8)
So, how I could identify the correct channel number if they are changed?
Probably I'm doing something wrong?
Will be glad to any help, thanks.
P.S.: How can I make sure that the order of the channels that I determined is correct?
I`m going step by step according to the setup instructions in the note.txt, but at the step f) I`ve blocked with the next situation:
I`ve found 4 sites and 5 channels at every one.
For example for Site1 I’ve got:
Cap+, 9999, 1, 991 , 450.0130, 0.0, 0
Cap+, 9999, 1, 991, 450.1500, 0.0, 0
Cap+, 9999, 1, 991, 450.2750, 0.0, 0
Cap+, 9999, 1, 991, 450.4380, 0.0, 0
Cap+, 9999, 1, 991, 450.5880, 0.0, 0
At the step f) I`m trying to recognize correct channel numbers, setup FMP24 to control/rest channel monitor (–rc option) on frequency 450.0130. Also I run DSD+ in control/rest channel decoder(–rc option). And at the event log I find the next notes:
450.013000 is first Cap+ repeater (Ch1 and Ch2)
….
450.013000 is fourth Cap+ repeater (Ch7 and Ch8)
At the 450.438 I’ve got the same situation:
450.438000 is first Cap+ repeater (Ch1 and Ch2)
450.438000 is fourth Cap+ repeater (Ch7 and Ch8)
So, how I could identify the correct channel number if they are changed?
Probably I'm doing something wrong?
Will be glad to any help, thanks.
P.S.: How can I make sure that the order of the channels that I determined is correct?
Last edited: