CBP Activity Detected in Kingman

[IC-R20]

Since last night and into this morning I've been picking up sporadic ENC chatter between two units RID 5243144 & 5243145 on 170.9875 NAC 701 recorded onto the TRX-1 while doing a 163 to 173 limit search for local activity. I've now set the TUNE mode directly onto this frequency and will leave it monitoring for a couple days to see how active it remains.

 

[ecps92]

Since last night and into this morning I've been picking up sporadic ENC chatter between two units RID 5243144 & 5243145 on 170.9875 NAC 701 recorded onto the TRX-1 while doing a 163 to 173 limit search for local activity. I've now set the TUNE mode directly onto this frequency and will leave it monitoring for a couple days to see how active it remains.

I had that prev notes as OBP for Yuma Sector - likely the Kingman Repeater (Stand Alone, not linked)

CBP has some AZ Repeaters on that freq but much different NAC's

 

[K2RNI]

I had that prev notes as OBP for Yuma Sector - likely the Kingman Repeater (Stand Alone, not linked)

CBP has some AZ Repeaters on that freq but much different NAC's

It seems linked. With what, I don't know but I get nothing on the rest of the band here when it goes active and it's been surprisingly talkative this week with some long transmissions. That or it just has a common input frequency/NAC getting keyed up by a powerful mobile talking another repeater the next area over. I get that alot with AZGF too.

 

[ecps92]

It seems linked. With what, I don't know but I get nothing on the rest of the band here when it goes active and it's been surprisingly talkative this week with some long transmissions. That or it just has a common input frequency/NAC getting keyed up by a powerful mobile talking another repeater the next area over. I get that alot with AZGF too.

linked, you would likely hear other repeaters at the same time, without finding other repeaters in use, what makes you think it is linked ?
Could be a Dispatch selecting multiple sites (occurs regularly here with my CBP - two conventional repeaters patched at the console)

Also, from my notes/logs that input (164.1750) freq is only used by Kingman with that NAC

 

[K2RNI]

linked, you would likely hear other repeaters at the same time, without finding other repeaters in use, what makes you think it is linked ?
Could be a Dispatch selecting multiple sites (occurs regularly here with my CBP - two conventional repeaters patched at the console)

Also, from my notes/logs that input (164.1750) freq is only used by Kingman with that NAC

very talkative between multiple RIDs and i hear no potential inputs on that or the rest of band.

 

[ecps92]

very talkative between multiple RIDs and i hear no potential inputs on that or the rest of band.

you may just not be close enough to catch the input, last I knew this was a stand-alone repeater, unless someone patched it from a console recently

 

[K2RNI]

yeah well that's kinda the thing about 30 year old notes and not living here, no hate.

 

[ecps92]

yeah well that's kinda the thing about 30 year old notes and not living here, no hate.

true but a codeplug from the past 5 yrs is so much more handy than 30 yr old (Analog) notes