CDM 1250 Programming Question

[chrisbatt]

When programming a CDM 1250 mobile radio, when the scan feature is disabled when there is activity on a scanned channel , my radio remains on the channel where there was activity and not the channel I previously manually selected. How do I fix this problem?

For example, if my radio is manually set to channel 1 and I am scanning, if I disable the scan feature while there is activity on a scanned channel, I want my radio to remain on channel 1 and not the scanned channel there was activity on.

Any help would be appreciated.

 

[Josh]

In the CPS, in the radio configuration menu and the scan tab, uncheck 'revert scan'.

" [x] Causes the radio to automatically move to the last landed scan - channel when exiting scan mode.
[ ] When disabled, the radio automatically moves back to the channel where scan was originally initiated"

 

[Skypilot007]

Since that seems to be resolved I have another question regarding the same radio.

With MDC signaling enabled for receive is there a way to adjust how long the ID is displayed before the display switches back to the channel number? It seems to be a default of about 10 seconds and I cannot find any adjustment for it in the cps.

Thanks for any help.

 

[Josh]

Nope no adjustments can be made. It's 10 seconds w/o scan, and whatever the scan hang-time is if scan is enabled.

-Josh

 

[Skypilot007]

I thought so...just needed a sanity check here to be sure. Thanks.

 

[chrisbatt]

Josh:

Thanks for the help. That was it.