clone radio shack 95 to ws1040 scanner
- Thread starter bob5731
- Start date
According to Pg 19 of the WS1040 manual the WS1040 and the PRO95 are NOT compatible for cloning.
tvengr
Well Known Member
The PRO-95 is analog only and does not support 700 MHz frequencies. The WS1040 will decode P25 Phase 1. What is your city, county, and state and which agencies would you like to monitor? For the WS1040, you can use ARC500 or PSREdit500 software. I use Butel ARC500 Basic for my PRO-106, the older brother of the WS1040. Both use the same software.
General Specifications
Features
- Can be updated to support Rebanding? NO
- 1000 channels - 10 banks
- 25-54, 108-174, 216-225, 406-512, 806-960,1240-1300MHz range
- Scan rate 60cps
- 5, 6.25, 7.5, 12.5kHz steps
- AM, FM
- Alphanumeric Text Tagging (12 characters per line)
- 5 list, 20 IDs, 100 IDs per bank; 1000 total IDs
- Motorola Control Channel Only trunking
- ID delay
- Backlight
- Per channel or global 20dB Attenuator
- 5 Preprogrammed search ranges/1 user defined search range
- 1 priority channel
- Weather alert and priority
- Computer programming (not computer control)
- Nice search 'seek' (search resume) feature
- Uses 4 AA Alkaline Batteries or 4 AA Rechargable batteries
- A cloning cable may be fabricated using 2 1/8inch mono jacks and shielded cable
RR System Compatibility
This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range:- System Types:
- Motorola Type I
- Motorola Type II
- Motorola Type IIi Hybrid
- Motorola Type II Smartnet
- Motorola Type II Smartzone
- Motorola Type II Smartzone Omnilink
- EDACS Standard (Wide)
- EDACS Standard Networked
Welcome to the RR forums @bob5731. The Pro 95 will not handle Oklahoma Wireless Interoperability Network (OKWIN) but your WS1040 should. Though the system is P25 Phase-II (TDMA) CAPABLE, Cleveland County utilizes FDMA talkgroups so as long as your county stays FDMA then the WS1040 should do the job
tvengr
Well Known Member
What is your city or town to determine the best site or sites?
ARC500pro getting nothing ennead my scanner. Add my ARC500pro file.
Cleveland County, Oklahoma
if some one would help e by fix it I would appreciate it.
Cleveland County, Oklahoma
if some one would help e by fix it I would appreciate it.
tvengr
Well Known Member
Unfortunately, Norman has a P25 Phase 2 trunked system which your scanner cannot receive: Norman Trunking System, Norman, Oklahoma Your file has 71 conventional frequencies with no alpha tags. You need to include the OKWIN P25 trunked system. I am working on a file for you.
It is also a simulcast system that may cause reception issues.
tvengr
Well Known Member
Here is an ARC500 file for Cleveland County with the OKWIN P25 trunked system. I will add conventional frequencies when I get time. Save the attached zipped file to your computer and extract. Open the extracted file with ARC500 and Upload to Scanner. Scan lists as follows:
| SCAN LISTS: |
| 1. CleveCo Services |
| 2. CleveCo EmergOps |
| 3. CleveCo Fire/EMS |
| 4. CleveCo EMS/Hosp |
| 5. CleveCo Law |
| 6. OK Hwy Patrol |
tvengr
Well Known Member
Are you receiving anything on the OKWIN trunked system?
tvengr
Well Known Member
If you upload the ARC500 file to your scanner, you will be scanning the OKWIN trunked system.
tvengr
Well Known Member
What businesses are you interested in? ARC500 does not support the PRO-95.
Can someone make me a win95 file for Norman Oklahoma in Cleveland county. When I get back home I'm going to upload my Arc 500 file I need someone to look at it and see if it's set up right.
I went ahead and go to subscription to radio reference.com so it automatically downloaded the data so I don't know if it's set up right but if y'all could take a look at it I'd appreciate it
I went ahead and go to subscription to radio reference.com so it automatically downloaded the data so I don't know if it's set up right but if y'all could take a look at it I'd appreciate it
