SDS100/SDS200: Cloning from SDS200 to SDS100

[roadman1977]

I would like to clone from the SDS200 to the SDS100. Can I copy the memory card from the SDS200 onto a new blank memory card and then place it into the SDS100? Are there any additional steps to take regarding the ESN on the SDS100?

 

[n1chu]

Both are compatable using Sentinel. First, load your programming from the SDS200 into Sentinel. Then change the setting in sentinel to SDS100. Now go ahead and download into the SDS100.

 

[nessnet]

They are both SDS, so they are virtually the same as far as Sentinel is concerned.

Many a time I have loaded the 200 profile into the 100 or visa versa.
(I don't have any VDC displayed on the 200, and a few other minor differences).

 

[roadman1977]

Thanks for the info!

 

[jstab]

They are both SDS, so they are virtually the same as far as Sentinel is concerned.

Many a time I have loaded the 200 profile into the 100 or visa versa.
(I don't have any VDC displayed on the 200, and a few other minor differences).

Does it also transfer your programming keys?

 

[RandyKuff]

If your talking Quick Keys... Yes...
Profiles can be different between the two... But it won't hurt anything...

Just copy the Root Folder (BCDx36HP) from the SD card from one scanner and drop it on an empty SD card for the other scanner...
You can tweek your profile preferences and anything else later...

 

[jstab]

If your talking Quick Keys... Yes...
Profiles can be different between the two... But it won't hurt anything...

Just copy the Root Folder (BCDx36HP) from the SD card from one scanner and drop it on an empty SD card for the other scanner...
You can tweek your profile preferences and anything else later...

Thank you.

 

[mc48]

Sentinel will always download the correct profile to the correct model, changing the target allows you to select which profile you want to view or edit. Favorite lists including Q-keys are all the same regardless of model, the only differences are from the profiles and the respective settings.