We have a system where I work at, that allows equipment operators to shut down a belt line in the event of an emergency. One of the pieces of equipment has failed to shut down the belt line on a recent test. So, we are looking in to fixing the problem, as well install another system in a new piece of equipment. I wanted to try and do this myself, so i took a quick look today, and they is what I found..
1.) The equipment contains a Motorola Radius CP 200 (I have programming cables and software for this radio).
2.)The mic input has a Rj45 plug with only a jumper wire connecting pins 5 and 6.
3.) The connector on the back of the radio (16 pins), has 3 connections made. Counting from left to right, There is a wire on the top row in number 4, and on the bottom has connections to 3 and 4.
4.) mounted to the radio is a plastic box that has a keyswitch and a Normally Open Push Button, Also inside is a ST-804A encoder.
I havent had time to visit the other side of the wireless connection, but I will tomorrow. Can anyone help me on what I should read up on to set something like this up in a new piece of equipment, or can anyone offer a connection diagram, or any kind of help.
Thanks.
1.) The equipment contains a Motorola Radius CP 200 (I have programming cables and software for this radio).
2.)The mic input has a Rj45 plug with only a jumper wire connecting pins 5 and 6.
3.) The connector on the back of the radio (16 pins), has 3 connections made. Counting from left to right, There is a wire on the top row in number 4, and on the bottom has connections to 3 and 4.
4.) mounted to the radio is a plastic box that has a keyswitch and a Normally Open Push Button, Also inside is a ST-804A encoder.
I havent had time to visit the other side of the wireless connection, but I will tomorrow. Can anyone help me on what I should read up on to set something like this up in a new piece of equipment, or can anyone offer a connection diagram, or any kind of help.
Thanks.