• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

cm200d

asstchief2651

Newbie
Joined
Aug 22, 2021
Messages
2
I am installing a CM200D MOTOTRBO radio bought programing cord through amazon still having problems programing an error comes up in little window
it says unable to connect check see if compatable programming cable is used any help would greatly be appreciated thank you.
 

RadioGuy7268

Member
Joined
Mar 11, 2006
Messages
189
Location
PA
You need to be using MotoTrbo CPS to program the CM200d.

Did you buy the radio new or used? Do you know what version of CPS it was using? MotoTrbo has the older CPS16 build 828 (probably would work for an older used radio) or new units might require the latest version of CPS 2.0

You need to supply more information if you want specific help beyond that.
 

asstchief2651

Newbie
Joined
Aug 22, 2021
Messages
2
radio is for police dept, ver 3 R01.011.300000, no on cps it was using. where would i get that software. i do have mototrbo software
 
Top