CO DTRS

Status
Not open for further replies.

nasa806

Member
Premium Subscriber
Joined
Apr 29, 2014
Messages
69
Location
Colorado
Is the system ID and WACN correct for the system? Entering it in the G5 and getting a out of range indicator for the Woodland Park site and I'm in Woodland Park,
 

Spitfire8520

Might be completely clueless! =)
Joined
Jun 29, 2009
Messages
1,888
Location
Colorado
It is 100% WACN: BEE07 & System ID: D1C.

Have you programmed Woodland Park into the "Site List" of your system with the RFSS ID(HEX): 4 & Site ID(HEX): F? It must be explicitly programmed into the "Site List," having just the control channel is not enough.

Have you verified that you have the correct "P25 Trunking System" selected for all knob positions?
 

nasa806

Member
Premium Subscriber
Joined
Apr 29, 2014
Messages
69
Location
Colorado
It is 100% WACN: BEE07 & System ID: D1C.

Have you programmed Woodland Park into the "Site List" of your system with the RFSS ID(HEX): 4 & Site ID(HEX): F? It must be explicitly programmed into the "Site List," having just the control channel is not enough.

Have you verified that you have the correct "P25 Trunking System" selected for all knob positions?
That was it my friend thank you. So cedar heights would be 4 and 18 correct?

i'm actually picking up EPSO talk groups on the Woodland site.
 

Spitfire8520

Might be completely clueless! =)
Joined
Jun 29, 2009
Messages
1,888
Location
Colorado
That was it my friend thank you. So cedar heights would be 4 and 18 correct?

i'm actually picking up EPSO talk groups on the Woodland site.
Yes, that is correct.

Good to hear that you have everything up and running.
 
Status
Not open for further replies.
Top