• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

codes & signals

Status
Not open for further replies.

kyguy

Member
Joined
Jan 27, 2006
Messages
184
Location
ky-oh-wv
My job requires me to travel all counties west of I-77 , I am looking for anyone that would share their codes / signals with any dept (police,fire,ems) for any of these counties. I'm getting ready to put my 996 in my truck and would like to know what everyone (the units) are talking about!! PM me for contact details. Thanks in advance!!
 

dintimid8or

Member
Joined
May 25, 2005
Messages
155
A little help

Ritchie County law enforcement uses state police codes and signals. Fire and EMS use plain English. Doddridge County law enforcement uses state police codes and signals; fire and EMS use plain English. Wood County uses mostly plain English for fire and EMS, I don't know about Parkersburg City fire or police. Fire is 800 mHz trunked and police is P-25 digital. I believe Pleasants County uses state police codes and signals for law enforcement, and they use plain English for fire and EMS. I have heard a little bit of Jackson County fire and ems, and I believe they use plain English, with some codes, like 10-8 for available, but cannot say for sure. Hope this helps a little bit.
 

kyguy

Member
Joined
Jan 27, 2006
Messages
184
Location
ky-oh-wv
Thanks

Thanks Craig, that helps!! The next time I'm up around Harrisville, I'll let ya know and buy ya that cup of coffee !
 

w8mkh

Member
Joined
May 28, 2004
Messages
341
Location
Parkersburg West Virginia
dintimid8or said:
Ritchie County law enforcement uses state police codes and signals. Fire and EMS use plain English. Doddridge County law enforcement uses state police codes and signals; fire and EMS use plain English. Wood County uses mostly plain English for fire and EMS, I don't know about Parkersburg City fire or police. Fire is 800 mHz trunked and police is P-25 digital. I believe Pleasants County uses state police codes and signals for law enforcement, and they use plain English for fire and EMS. I have heard a little bit of Jackson County fire and ems, and I believe they use plain English, with some codes, like 10-8 for available, but cannot say for sure. Hope this helps a little bit.
Parkersburg fire is on 153.785 p-25
Parkersburg Pd is on 155.490 p-25 enc with some traffic on the old system 856.9625,860.9625
Wood County uses http://f4.grp.yahoofs.com/v1/UCisROiac_Vix71k5EO8I4Olm2e4AZI80Puzkf2pgrgMwK9RMfDHRJeEi9U3w8DTzDnBiUYENWPvl--iMkIxyA/10 code.BMP
 
Status
Not open for further replies.
Top