• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Comm specialist PE-1000 paging encoder programming help.

Status
Not open for further replies.
W

WX5812

Member
Joined
Jul 30, 2018
Messages
398
Location
Fort Worth
I have a PE-1000 2-tone encoder and I’ve read through the manual several times but either I’m missing something or can’t comprehend, but I can’t seem to figure out how to program it.
I have several 2-tone Motorola pagers. For example pager number 1 has tones 457.9 and 330.5. So would I program this as 001? The manual has a chart showing which group and tone number they are Which is group 1 and tone 6 and 0. I tried entering 160 and p but it doesn’t send the correct tones. Previous owner must have 160 as a different set of tones. but I just don’t know how to program them in on the PE-1000. Any help would be appreciated or of this is in the wrong area I can move it to the correct forum.
 

Attachments

  • 420F0954-035B-4018-ADFD-ED60DEE5E07F.png
    420F0954-035B-4018-ADFD-ED60DEE5E07F.png
    236.4 KB · Views: 9
Status
Not open for further replies.

Similar threads

L
BCD325P2/BCD996P2: Help programming TGID
Replies
15
Views
742
Luis650
L
I
Ksun DM10UV programming question
Replies
1
Views
266
igorkuvac
I
D
BCD325P2/BCD996P2: DMR Programming help
Replies
4
Views
543
dgoodson
D
C
UNIDEN BCD436HP NC VIPER PROGRAMMING HELP PLEASE!!
Replies
13
Views
1K
Chris0516
Chris0516
C
Ailunce HA1G DTMF?
Replies
0
Views
347
Cashanova48
C
Top