In addition to Sinclair & Taco antenna, anyone know other companies that make the antennas for VHF voice communications for ATC towers and ARTCC sites. Just curious.
Thanks for all replies.
Thanks for all replies.
Companies that make professional level ATC 118-137 Mhz antennas
- Thread starter xms3200
- Start date
- Status
- Joined
- Dec 19, 2002
- Messages
- 2,129
No, but one antenna not mentioned often is the Sirio antenna which I have used and it worked very well. I do not think a commercial antenna will necessarily work better.
Here is the Sirio antenna. The larger diameter upper element gives it better broader frequency coverage. It is meant to be mounted on the very top of a hollow pole (which would be fastened to another pole so the coax can exit the first pole). I doubt you will find a more rugged antenna or one with more gain.
I do have an FAA surplussed 100-400 MHz discone but do not know where others like it can be found and never saw the FAA use one.
Here is the Sirio antenna. The larger diameter upper element gives it better broader frequency coverage. It is meant to be mounted on the very top of a hollow pole (which would be fastened to another pole so the coax can exit the first pole). I doubt you will find a more rugged antenna or one with more gain.
I do have an FAA surplussed 100-400 MHz discone but do not know where others like it can be found and never saw the FAA use one.
ATCTech
Active Member
- Joined
- Aug 13, 2002
- Messages
- 1,857
DPV is another that I neglected to mention to you in our exchange of a few days ago.
antennaproducts.com
DPV | vertical dipole vhf/uhf Archives - Antenna Products
antennaproducts.com
Telewave.
dlwtrunked, is it the Sirio GP 108-136 LB/N like in the pic shown.
ATCTech
Active Member
- Joined
- Aug 13, 2002
- Messages
- 1,857
This is probably the 100-400 MHz discone you mentioned above:
antennaproducts.com
BCV-116M Rugged VHF/UHF Bicone Antenna Omni 100-400 MHz - Antenna Products
Height: 40' Support: Self-supported Arms/Mounts: 8 Assembly: Knock-down (unassembled) Part Number: 1500-0445-204 Request Quote Not finding what you're looking for? We can custom-build antenna products to your exact specifications.Contact us here or call 1-940-325-3301 for more information.
antennaproducts.com
- Joined
- Dec 19, 2002
- Messages
- 2,129
Yes. It worked so well (it was used to receive and transmit in a work application) that the aircraft was shocked and said they never heard the signal from the ICOM A5 out that far before.
DPD Productions Aviation - Base & Mobile Antennas
Groeteschele
Member
Other member say www.antennaproducts.com and they manufacture excellent antennas. Also High Gain Aviation Band Antenna - Antenna Experts very good too. www.dpdproductions.com make good affordable hobby airplane antenna.
- Joined
- Dec 19, 2002
- Messages
- 2,129
This is probably the 100-400 MHz discone you mentioned above:
BCV-116M Rugged VHF/UHF Bicone Antenna Omni 100-400 MHz - Antenna Products
Height: 40' Support: Self-supported Arms/Mounts: 8 Assembly: Knock-down (unassembled) Part Number: 1500-0445-204 Request Quote Not finding what you're looking for? We can custom-build antenna products to your exact specifications.Contact us here or call 1-940-325-3301 for more information.
No. That is not really a discone (though often wrongly advertised as such) but a biconical. The FAA I have is a true discone with the disk configuration above a cone configuration. It has more rods than the 8 in each place than in the typical hobby design and is substantially more rugged with a substantially larger insulator between. I do not have a photo and currently it is apart in a box. I think they were made under an FAA contract from the paperwork that came with it.
That company in your link also sells circularly polarized antennas to the FAA and I have seen those on one mountain top FAA site (Buena Vista, VA). See attached.
prcguy
Member
DB Products, KRECO, Antenna Specialists (now some other name), Antenna Products, Celwave, Astron, RAMI come to mind right away and there are dozens more. DPD Products is consumer product and not something you would see in use at an airport.
spanky15805
Newbie
- Joined
- Sep 18, 2004
- Messages
- 306
Are
Are you looking to purchase one the commercial antennas, you are going to run Andrews LDF-50A for coax, right?
paulears
Member
Amphenol jay beam are popular in europe. Similar product lines and similar mind blowing prices, however they're amazingly well built. I've still got a nearly 40 year old discone, and a 30 year old UHF vertical still going strong.
Ubbe
Member
I see lots of Aerial.Oy antennas. The ones that where installed in the 70's are still doing service. They are made of welded aluminium square tubes. They can be had as a single dipole up to 8 stacked. The 4 stacked VHF Air are something like a $1200 each.
/Ubbe
/Ubbe
Groeteschele
Member
- Status
Similar threads
