-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Console Faceplate for SDS200?
- Thread starter mrred911
- Start date
Google gamber Johnson faceplate for Uniden SDS200. I found some listed.
From what I've been able to find, Gamber Johnson doesn't seem to have one for the SDS200. A bunch from other manufacturers, but not Gamber Johnson.
I found a Gamber Johnson catalog at:
issuu.com
The only Uniden faceplate listed on page 156 is for the 1X DIN models (bcd536, bcd996p2, bct15, etc). Nothing is listed for the 1.5X DIN SDS200. There is a note:
Gamber-Johnson: Public Safety Product Catalog
Gamber-Johnson is the leading manufacturer of Rugged, Reliable, and Responsive mounting solutions for mobile devices. Established in 1954, our products have proven their durability in many high-intensity industries offering secure device mounts for rugged laptops, tablets, GPS units, printers...
The only Uniden faceplate listed on page 156 is for the 1X DIN models (bcd536, bcd996p2, bct15, etc). Nothing is listed for the 1.5X DIN SDS200. There is a note:
Should Gamber Johnson's dimensions not correspond with your equipment or you do not find your equipment listed, contact us at 1.800.487.9220. We will help you find a faceplate which will work with your equipment.
Good luck in your search.Similar threads
BCD436HP/BCD536HP:
NXDN Upgrade key best price for BCD536HP?
SDS100/SDS200:
SDS200: Site issue with NXDN reception with debug info
