Control Vs Licensed

[Skud]

On my Pro 96 do I need to have the Control and the Licensed Freq programmed in or only the control freq?

http://radiowurx.com/mpscs/42.73336 -084.55941.html

Site ID: T0102
Control Frequency: 868.9625
Licensed to: Lansing
County: Ingham
Licensed Frequencies: 866.4625 866.8375 867.275 867.4625 867.9625 868.2 868.4625 868.5125 868.7625 868.9625

 

[SCPD]

Check the manual to see if it supports control channel only. If it does then you can program in the control channel only. However, if the control channel chnages it will not be detected except for no traffic on your scanner.

 

[fineshot1]

Check the manual to see if it supports control channel only. If it does then you can program in the control channel only. However, if the control channel chnages it will not be detected except for no traffic on your scanner.

Skud - you would also need to program in the alternate control channels(868.5125, 868.7625)
as well. If the primary is down for any reason control shifts to one of the alternates.

 

[seamusg]

Use the database here, it's more up to date.
http://www.radioreference.com/modules.php?name=RR&sid=100