• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

CPS Software do not know how to turn on Programing Setting for CP200

Status
Not open for further replies.
J

justinryan51

Member
Joined
Feb 29, 2012
Messages
2
I have the CPS programming software for Motorola Radios and have used it several times on BPR40's however I do not know how to turn on the programming mode on a CP200. A mag one you hold down a side button and turn on the radio. This does not work on the Cp200. anyone know what I'm missing?
 
SteveC0625

SteveC0625

Order of the Golden Dino since 1972
Premium Subscriber
Joined
Oct 24, 2009
Messages
2,795
Location
Northville, NY (Fulton County)
justinryan51 said:
I have the CPS programming software for Motorola Radios and have used it several times on BPR40's however I do not know how to turn on the programming mode on a CP200. A mag one you hold down a side button and turn on the radio. This does not work on the Cp200. anyone know what I'm missing?
Click to expand...

Do you have the Commercial Series CPS or the Mag One Series CPS?
 
J

justinryan51

Member
Joined
Feb 29, 2012
Messages
2
Not sure, software came with a radio package i bought used. I do think its the commercial version
 
SteveC0625

SteveC0625

Order of the Golden Dino since 1972
Premium Subscriber
Joined
Oct 24, 2009
Messages
2,795
Location
Northville, NY (Fulton County)
justinryan51 said:
Not sure, software came with a radio package i bought used. I do think its the commercial version
Click to expand...

OK, two points you need to know.

First, you must have the Commercial Series CPS to program the CP200's. The MagOne CPS is exclusive to the MagOne's.

Second, if your CP200 has been programmed with a newer version than the one you have (if that's what you have), then your software will not work. The radios must be programmed by the same revision level or newer.

So, first verify what software you have. If you do not have the Commercial Series CPS, please do not ask for it here or on most other tech sites similar to RR or the batboard. It's against the rules and illegal.

Also, do you have the proper cable for the CP200?
 
Status
Not open for further replies.

Similar threads

J
Moto R7 Home/Settings Button and Zone Change
Replies
1
Views
206
YL3IM
YL3IM
W
CP125 CPS Programming Software
Replies
5
Views
501
mbnv992
M
KD7RJC
Turn TIDRADIO TD-H5 into a ham radio
Replies
0
Views
190
KD7RJC
KD7RJC
M
BKR5000 TXAD issue
Replies
3
Views
470
raymieboy55
R
K
HT1000 programming woes
2 3
Replies
47
Views
2K
knockoffham
K
Top