• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

cs-3400

rfpsub

Member
Joined
Dec 13, 2009
Messages
4
When trying to enter new zones I am able to type the names in the zone names in zone operation but only one zone is showing up in the tree below. Anyone have any suggestions of how to get all of the rest of the zones to show up. I am using cs 2.10. Thanks,
 

12dbsinad

Member
Joined
Mar 15, 2010
Messages
1,212
When trying to enter new zones I am able to type the names in the zone names in zone operation but only one zone is showing up in the tree below. Anyone have any suggestions of how to get all of the rest of the zones to show up. I am using cs 2.10. Thanks,
You need to enter the number of channels you'd like in each zone. Default is set to 0. Scroll all the way to the right and look for "capacity", enter the desired number of channels and you'll see the zone get added on the left column.
 

rfpsub

Member
Joined
Dec 13, 2009
Messages
4
You need to enter the number of channels you'd like in each zone. Default is set to 0. Scroll all the way to the right and look for "capacity", enter the desired number of channels and you'll see the zone get added on the left column.
Thanks so much I knew it was something I was missing. Been quite a wile since I’ve programmed an Icom,
 
Top