firemedic78
Member
Looking for the new Dallas Co. Law Digital frequency. Law switched over 2 days ago, Fire/EMS will be doing it in a few months....
Looking for the new Dallas Co. Law Digital frequency. Law switched over 2 days ago, Fire/EMS will be doing it in a few months....
I'm out of the area but went through all the Dallas County licenses and only one for digital
operation. This is a 700Mhz trunking system. WQYQ219
------
770.06875
770.51325
771.00625
771.28215
-----
I'm out of the area but went through all the Dallas County licenses and only one for digital
operation. This is a 700Mhz trunking system. WQYQ219
------
770.06875
770.51325
771.00625
771.28215
-----
These are the right frequencies (2nd one should be 770.53125). Dallas County Sheriff is using the ISICS system, which is also used by Westcom. They are using a phase 2 Talkgroup, 24582, which can be heard on both Dallas County and Westcom systems.
Donald
I
The only issue I'm having, and I don't know if it's really an issue or not, but when I enter my frequencies, it won't let me enter the fifith digit(5), on the back end, so hopefully it will work without that fifth digit. It will allow me to enter that fifth digit when I enter the frequency, for example, when I entered the first frequency, I entered it as 770.06875, but when I go into my settings after I programmed the Trunking P25 system into my radio, when I go to all of my frequencies in that list, it says 770-0687 and so on, so it doesn't show the fifth digit in that frequency, but I'm hoping internally it still knows that's if digit, and again, I don't even know if that's even an issue or not. I've already got it scanning and it's catching the control channel and it's also showing the signal bars all the way up to the top, just ain't getting any actual reception yet, and of course it's 5 in the morning, so it may be a slow start to the morning. But I'll keep messing with it, but I think you gave me a lot of help. I'll let you know if I need any more help. Thanks a lot for your input.
These are the right frequencies (2nd one should be 770.53125). Dallas County Sheriff is using the ISICS system, which is also used by Westcom. They are using a phase 2 Talkgroup, 24582, which can be heard on both Dallas County and Westcom systems.
Donald
Donald, I don't know how you found the talkgroup ID for Dallas County Sheriff, but you did an excellent favor and help me out a lot, I do have another favor to ask you, since you were able to find the correct talkgroup ID, there's at least one more out there because I heard them ask a deputy to switch over to ops channel 2 earlier this evening to dispatch a call out because channel 1( the talkgroup ID you gave me) was tied up on a higher prioritizing call, so if there's any way you can figure out that second talkgroup ID for channel 2 or for that matter any other Dallas County law talkgroup ID's that there is out there, with the exception of the city of Waukee, I already have them in the WestCom system. But again since you were the one that found the original talkgroup ID , I thought I'd give you a try and see if you could help me find at least Channel 2, if not more. I would greatly appreciate it. Thank you sir and be safe.
Chris
I think I just got lucky. I was checking the Dallas County site for activity and they had finally started using it. They are about the only users on the site right now, although Westcom Fire dispatch has been added since the last time I listened. Just got lucky again and heard someone checking in on channel 2, TG 24583.
Donald
Just heard Perry police talking to Dallas County dispatch on TG 23781.