Danville Ambulance

[W7FDX]

Im aware of the vhf low band freq of 47.5 that they use to communicate with county and all. But they also have UHF frequencie(s) that they use for day to day ops (Routine transports and such). I cant find them anywhere on RR? Also AREA Ambulance has a UHF freq for their day to day ops and I cant find it anywhere either. Any ideas where to find it?

 

[W8RMH]

The are probably using a community LTR or EDACS system which would be licensed to the system owner.

 

[captclint]

Im aware of the vhf low band freq of 47.5 that they use to communicate with county and all. But they also have UHF frequencie(s) that they use for day to day ops (Routine transports and such).

Chances are they use the EMS Med freq's listed here: Montour County, Pennsylvania I have monitored Med 4 and Med 9(462.9500 Dispatch), but you will need to try them all for awhile. Don't program the PL's, as I have seen a different PL(146.2), so not sure which is correct.

 

[W7FDX]

I have all the med frequencies in my scanner and no activity at all on med 1-8 and med 9 and 10 are used by northumberland county and med 11 and 12 are used by union.

 

[W7FDX]

Ive got it narrowed down to the 460-470mhz range?

 

[W7FDX]

I found it, it's 461.35 but the squelch opens up every 10 seconds or so what causes this?