- Joined
- Nov 5, 2005
- Messages
- 19
I have a Uniden BCT996XT with the most recent firmware available 1., and I program and monitor with the program ProScan.
It feeds a RR scan feed, one that I monitor hit and miss, but recently noticed upon reviewing the hits that I'm not getting anything coming off the Greenville, New Madison, Osgood or even Ft Recovery sites. I am however receiving a lot of traffic off the Celina site which is much farther away that any of the ones previously mentioned. I am using an outside antenna at 45 feet and previously got full signal coverage from all these sites.
I have scanned the past couple days with ID search instead of ID scan and nothing. I live in western Darke County. I downloaded the frequencies for all the sites again off of the RR website and all show narrow band. I can hear a control channel on the Osgood site, but not on any of the others. It puzzles me why the Celina site works fine and the others are silent or in the case of the Osgood site I can't hear anything even though the control freq is loud and clear when the scanner is locked on that channel.
Please see the screen shot below for further. I did confirm that all frequencies listed do match the RR database.
Any help would be appreciated. I've tried reading on several posts, but I can't find anything that matches this problem. It may be there, but sometimes it is like trying to find a needle in a hay stack.
It feeds a RR scan feed, one that I monitor hit and miss, but recently noticed upon reviewing the hits that I'm not getting anything coming off the Greenville, New Madison, Osgood or even Ft Recovery sites. I am however receiving a lot of traffic off the Celina site which is much farther away that any of the ones previously mentioned. I am using an outside antenna at 45 feet and previously got full signal coverage from all these sites.
I have scanned the past couple days with ID search instead of ID scan and nothing. I live in western Darke County. I downloaded the frequencies for all the sites again off of the RR website and all show narrow band. I can hear a control channel on the Osgood site, but not on any of the others. It puzzles me why the Celina site works fine and the others are silent or in the case of the Osgood site I can't hear anything even though the control freq is loud and clear when the scanner is locked on that channel.
Please see the screen shot below for further. I did confirm that all frequencies listed do match the RR database.
Any help would be appreciated. I've tried reading on several posts, but I can't find anything that matches this problem. It may be there, but sometimes it is like trying to find a needle in a hay stack.