I've done some searches on here for what I'm looking for, and perused all of the topics under this Uniden section, but couldn't find anything (that I could see) on this topic.
The BCT15 is a fantastic piece of equipment, but in my case I bought it for 1 purpose, and 1 purpose only: to scan 10 aviation channels, and those channels only. I'm not interested in Trunking or Bear Scanner features, nor am I interested in other features such as Close Call, etc., or the Weather or other bands, or searching for anything. OK, so this scanner is wee bit over-kill for what I want to use it for - I know.
Quite easily this isn't possible with this scanner, but is it by any chance possible to disable everything, and then only turn on what a person needs? In other words, for me to be able to disable everything, and then only program in the 10 frequencies that I want to scan?
By default everything is on. I set up a system & a group, and programmed the 10 requencies into that group. But when it started to scan, the scans kept getting interrupted by Close Call hits, and other bands such as Police cutting in. So I had to keep going through various menus and permanently lockout things that I have no interest in. For example, when you first turn the unit on, it starts up with Highway Patrol for Alabama, with HP displayed & BT flashing. I don't want any of that, so I would like to turn everything off. I realize that I can go through and turn them all off (or lockout) one by one, but is there a simple way to turn everything off?
Just curious, as it would make life so much easier. Thanks in advance.
The BCT15 is a fantastic piece of equipment, but in my case I bought it for 1 purpose, and 1 purpose only: to scan 10 aviation channels, and those channels only. I'm not interested in Trunking or Bear Scanner features, nor am I interested in other features such as Close Call, etc., or the Weather or other bands, or searching for anything. OK, so this scanner is wee bit over-kill for what I want to use it for - I know.
Quite easily this isn't possible with this scanner, but is it by any chance possible to disable everything, and then only turn on what a person needs? In other words, for me to be able to disable everything, and then only program in the 10 frequencies that I want to scan?
By default everything is on. I set up a system & a group, and programmed the 10 requencies into that group. But when it started to scan, the scans kept getting interrupted by Close Call hits, and other bands such as Police cutting in. So I had to keep going through various menus and permanently lockout things that I have no interest in. For example, when you first turn the unit on, it starts up with Highway Patrol for Alabama, with HP displayed & BT flashing. I don't want any of that, so I would like to turn everything off. I realize that I can go through and turn them all off (or lockout) one by one, but is there a simple way to turn everything off?
Just curious, as it would make life so much easier. Thanks in advance.