• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

discriminator tap of the pro-2051

Status
Not open for further replies.

ab3ai

Member
Joined
Nov 22, 2004
Messages
118
Hey Steve2004,
I used LND7 for mine. It works good with either a soundcard or data slicer.
 

steve2004

Member
Joined
May 29, 2006
Messages
77
ab3ai said:
Hey Steve2004,
I used LND7 for mine. It works good with either a soundcard or data slicer.

it gets better audio!

Thanks.
 
Last edited:

ab3ai

Member
Joined
Nov 22, 2004
Messages
118
I mounted my jack under the antenna connection. With the back being metal it's conected to ground, so I didn't run a ground. If you mount it to the back of a plastic cabinet radio (Pro2052/2050 for example), you will have to run a ground wire to a ground point.
 

ohi007

Member
Joined
Jun 5, 2009
Messages
22
Location
Canton, oh
Hello, sorry to dig up an ancient post, but can you please tell me how you tapped this scanner, any resistors used, etc. I have 2 of them that I want to tap and am new to this. A friend did one on an old pro2026, but I'm afraid is on its last leg.
Any pics would help. While I am familiar with electronics and have done my fair share of soldering, my strengths end as soon as I pop the top. Lol.

Thanks
Steve
 
Status
Not open for further replies.
Top