TRX-1: Display shows "D2" on a Phase-I transmission...

Status
Not open for further replies.

djeplett

Member
Premium Subscriber
Joined
Feb 19, 2005
Messages
812
Location
NE Wisconsin
Anybody else noticing the display showing "D2" on the top row when in fact it's receiving a Phase-I transmission?

I've had it show once in a while on a trunked Phase-I system and also on conventional Phase-I transmissions. According to the manual the display is supposed to only show "D2" when the radio is receiving a Phase-2 transmission.

Before anybody thinks I'm actually receiving Phase-2 let me cut you off at the pass and say that at the same time the display was reading "D2" my old GRE-500 was decoding the exact same transmission.

Bug perhaps?
 

Johnnydollar2

Member
Joined
Oct 31, 2007
Messages
1,321
Location
IL
D2 on Phase 1 Transmissions

Yes. It's a bug somewhere in there. I get that D2 for a 453.000 digital IDOT channel here near Chi-raq. They are not D2. Doesn't do it all the time. IT's been discussed before in here.
 

djeplett

Member
Premium Subscriber
Joined
Feb 19, 2005
Messages
812
Location
NE Wisconsin
Oops. I've been following this forum for a while and missed where it was discussed. Beat that dead horse!

Sent from my LGUS992 using Tapatalk
 

Johnnydollar2

Member
Joined
Oct 31, 2007
Messages
1,321
Location
IL
It was long ago after I got my WS1080 first in Sept 2014. So It would take some digging to find it anyway ;0
 

djeplett

Member
Premium Subscriber
Joined
Feb 19, 2005
Messages
812
Location
NE Wisconsin
Ah, ok. Makes me feel better. Thanks!

It's interesting that it's so random.

Sent from my LGUS992 using Tapatalk
 
Status
Not open for further replies.
Top