DMR Avalon St John's, Newfoundland area

Cider_joe

Newbie
Premium Subscriber
Joined
Feb 25, 2008
Messages
3
I have been scanning St. John's Municipal Services for a while using the downloaded info form RR. I use MotoTRBO trunk for the DMR system on a SDS100 but have not heard any voice. I set it up as conventional system and it works. Anyone know why DMR works as conventional and not MotoTRBO trunk.
 

mciupa

Canadian DB Admin
Moderator
Joined
Nov 5, 2002
Messages
8,531
Location
I'm here a lot
My experience with DMR Tier 3 is that you must have the correct LCN/LSN numbers to trunk track correctly. Until someone else can chime in, what I would do is run LCN Finder on the SDS 100 and see if it matches what is listed in the database. It may be fine as is, but you can confirm for yourself in the meantime.
 

Cider_joe

Newbie
Premium Subscriber
Joined
Feb 25, 2008
Messages
3
My experience with DMR Tier 3 is that you must have the correct LCN/LSN numbers to trunk track correctly. Until someone else can chime in, what I would do is run LCN Finder on the SDS 100 and see if it matches what is listed in the database. It may be fine as is, but you can confirm for yourself in the meantime.
I will play around with the LCN finder and see. I did change the TIG from16 to 6114 and did get some voice so it must be the settings. thanks.
 

BC_Scan

Member
Joined
Aug 26, 2006
Messages
727
Location
Vancouver BC
Make sure you do one site at a time as the LCN has not been discovered per the database.
In order to trunk track, you need that info. It can be time consuming, but once done you will hear everything.
 
Top