DMR RC 4

Status
Not open for further replies.

werinshades

Member
Premium Subscriber
Joined
Jan 21, 2002
Messages
6,397
Location
Chicago , IL
UPMan and crew....I might have a found a nuisance issue in regards to the Delay on a CAP+ system. Southwest Airlines at Midway has been very busy for obvious reasons since yesterday and their radio system has been put to the limits. During ID search on another CAP+ system, the Delay works as it's supposed to. However, on my Southwest CAP+ system, I have an I-CALL Talkgroup set up as i0 and scanning in ID Scan mode and have noticed the last few I-Calls, the Delay is not holding the conversation (I have the Delay set at 10 seconds). They don't use it all the time, but I have alert lights and sounds to inform me when I am receiving an I-Call.

Other than that the Delay has been resolved in CAP+ system with this last release and it's been good timing with Southwest Airlines computer issues. Non-stop radio traffic. Thanks again.
 

ems170

Member
Feed Provider
Joined
Feb 10, 2004
Messages
285
Location
Connecticut
Thank you for the input and suggestions. That is how I have it currently programmed. It is set up with a single DMR 1 freq system with 10 sites. However, the 536 does not show you what site is is receiving from. So the display will only show tg102 and the name assigned to it. It could be any of the campus locations and without a site display it's useless, because tg 102 is the admin channel for all of them.

So, the only way to know which campus admin channel is talking is to program each site as a separate system and that way the tg 102 can be labeled for the appropriate campus, and having only that campus frequency in the system ensures it is audio from that campus. This is very inefficient because it generates 9 additional systems to have to scan.
 
D

darunimal

Guest
ems170 have you the ability to use the RH mkII test software on the computer with the 536 connected at least via WI-FI
 

DataSquid

Member
Joined
Jan 1, 2015
Messages
104
Location
Waterloo, Ontario
I've been sitting on this bug until the last minute in hopes to get another week of beta: when booting the copyright date is still 2014.

Sent from my SM-G935W8 using Tapatalk
 
Joined
Feb 3, 2009
Messages
2,078
Location
So Far Away....
I believe the 2014 is in reference to the patents for the entire radio...the X36 series debut was in 2014.
In that case, the 2014 will not update - its is filed with the US pat. offices..
 
D

darunimal

Guest
Glad my car and tv don't tell me which year they were made. Sounds like I need to get the label maker out. Actually I might do this on my light bulbs and batteries.
 

Jay911

Silent Key (April 15th, 2023)
Feed Provider
Joined
Feb 15, 2002
Messages
9,378
Location
Bragg Creek, Alberta
Sitting on Uniden Tech Support - The RadioReference.com Forums hitting:

fe1.jpg
 
Status
Not open for further replies.
Top