You should program conventional DMR as a One Frequency Trunked system, or you won't be able to program or track timeslots, talkgroups, or radio IDs.
True.
I was going to add that info after I realized two different groups are using the same frequency but different TGs and timeslots in the OPs county.
I also usually program many of the DMR systems as 1FT systems after I confirm they are using actual talkgroups in the least.
Those programmed as conventional do still grab the RID for logging but you can't program talkgroups to ignore unwanted chatter in conventional mode or select slots to also selectively ignore if desired.
The majority of the conventional DMR channels in use here in my area do not make use of talkgroups or slots for all practical purposes so those are fine as a standard conventional entry.
So yes, these particular set of listings on 155.070 would need to be input manually as a 1FT system if that's what you are after.
As to the OPs question though, these would be imported as conventional entries as I answered. It's up to the user to change them to 1FT if needed.