• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Documentation, where is it.

Status
Not open for further replies.

merlin

Active Member
Joined
Jul 3, 2003
Messages
2,542
Location
DN32su
Trying to find info on ctcss, dts, tone remote, radio ID and any associated programming info. Thought if any site would have such, it would be here.
 

a417

Active Member
Joined
Mar 14, 2004
Messages
4,669
are you looking for hardware(/software) support specific to a radio and how to program, or what to program into the radio you have in front of you, or information about those separate things? (ctcss, dts, etc)
 
Last edited:

merlin

Active Member
Joined
Jul 3, 2003
Messages
2,542
Location
DN32su
are you looking for hardware(/software) support specific to a radio and how to program, or what to program into the radio you have in front of you, or information about those separate things? (ctcss, dts, etc)
At first. DTS is a bit old hat, so is selcall. Looking for any tone encoding charts for G-star which I believe is a spinoff of MDC 600 1200.
Specifically setting radio ID with this, or setting with programmer.
73s
 
Status
Not open for further replies.
Top